Author Index

A

  • Aagheb, Roya Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • Abbasi, Mohammad Reza Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Abbaspour, Fatemeh Buckling analysis of micro-plates reinforced with graphene platelets with piezoelectric face-sheets [Volume 24, Issue 1, 2022, Pages 6-32]
  • Abdi Kermani, Davood Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Abdolahi, Mahdieh Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Abedi, Mohammad Hadi Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2022, Pages 93-113]
  • Abedzadeh Maafi, Rahmat Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Abolfathi, Saman An experimental study on drag coefficient of a cam-shaped tube with different aspect ratios [Volume 21, Issue 2, 2019, Pages 75-91]
  • Abolghasemi, Ebrahim Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2022, Pages 131-151]
  • Abri nia, Karen Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Abtahi, Mahdi Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Abtahi, Mahdi Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2022, Pages 201-220]
  • Abtahi, Seyed Mahdi Chaos Analysis and Control in Gear Transmission System using Model Predictive Sliding Mode Algorithm [Volume 25, Issue 2, 2023, Pages 40-56]
  • Adamian, Armen Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Adamian, Armen Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Adamian, Armen Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Adibi, Pouyan Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2021, Pages 205-240]
  • Adibi firozjaei, Mohammad ali - [Volume 13, Issue 3, 2020, Pages 39-63]
  • Adineh, Shayan Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2024, Pages 135-154]
  • Adlparvar, Mohammad Reza Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Afaghi Sardroud, Negar Determining the magic tire model parameters using self-organizing map method and assessment the road condition on the parameters [Volume 23, Issue 2, 2021, Pages 114-128]
  • Afshari, Ebrahim - [Volume 14, Issue 2, 2012, Pages 6-29]
  • Afshari, Parvaneh Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Aghadavoudi, Farshid Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Aghazadeh, Arsalan - [Volume 13, Issue 4, 2011, Pages 19-31]
  • Aghaziarati, Zeinab Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2020, Pages 197-219]
  • Ahangarpour, Ameneh An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
  • Ahmadi, Javad Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Ahmadi Kermanshahi, Morteza Design of an exoskeleton robot for rehabilitation of people with movement disabilities [Volume 23, Issue 1, 2021, Pages 170-193]
  • Ahmadsani, Somaye Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Ajabshiri, Navid Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2022, Pages 6-28]
  • Ajalli, Fariba Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2014, Pages 39-54]
  • Akbari alashti, Reza - [Volume 13, Issue 3, 2020, Pages 79-102]
  • Akbariyan, Eyvaz - [Volume 14, Issue 2, 2012, Pages 30-44]
  • Alami nia, Amin Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Alami nia, Amin Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Alam Rajabi, Aliakbar Experimental evaluation of needle electrode polarity variations effect on enhancement of water evaporation with electrohydrodynamic method [Volume 16, Issue 2, 2014, Pages 38-59]
  • Alasti, Aria analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2022, Pages 93-113]
  • Alemohammad, Seyed Hamidr Reza Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Alemohammad, Seyed Mohammad Javad Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Alfi, Alireza Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2022, Pages 29-56]
  • Aliabadi, Mohammad The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2020, Pages 33-6]
  • Alibeigloo, Akbar Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity [Volume 24, Issue 3, 2022, Pages 6-27]
  • Ali jani, Ali - [Volume 14, Issue 1, 2012, Pages 6-19]
  • Alinia ziazi, Ali Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Alishirazi, Reza Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Amanifard, Nima Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Amanifard, Nima Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2019, Pages 182-209]
  • Amanifard, Nima Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Ameri, Mohammad Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Amidpour, Majid Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Aminfar, Habib Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Amini, Saeed Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Amin Yazdi, Seyed mohamad ali Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • Amiralipour, Majid Potential Analysis of the combination of two types of thermal and member of desalination unit in converting a gas power plant into Combined Water and Power (CWP) [Volume 20, Issue 4, 2019, Pages 154-181]
  • Ansari, Reza Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Ansari, Reza Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Ansari, Reza Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Ansari, Reza - [Volume 14, Issue 1, 2012, Pages 6-19]
  • Arab, Amir Hosein Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Arab kohsar, Ahmad - [Volume 13, Issue 4, 2011, Pages 32-45]
  • Arabkohsar, Ahmad - [Volume 14, Issue 4, 2012, Pages 32-45]
  • Arab Koohsar, Ahmad Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Arab maleki, vahid An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Arab Maleki, Vahid A new analytical method to investigate the vibrational behavior of fluid embedded pipe [Volume 15, Issue 1, 2013, Pages 6-20]
  • Arab Maleki, Vahid Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Ardakani, Mohammadali Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2016, Pages 69-84]
  • Ardakani, Mohammadali Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Ardakani, Mohammadali Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2015, Pages 81-97]
  • Ardakani, Mohammadali Experimental investigation of wind tunnel performance due to the blockage of models within the test chamber [Volume 14, Issue 4, 2012, Pages 118-130]
  • Ardakani, Mohammad Ali Experimental investigation of pressure drop of protective screen in wind tunnel [Volume 15, Issue 4, 2014, Pages 23-38]
  • Ardekani, Mohammad Ali Experimental study of diffuser effect on the fan performance [Volume 15, Issue 2, 2013, Pages 24-42]
  • Arefi, Mohammad The effect of parameters of visco-Pasternak foundation on the vibration characteristic of a FG square plate integrated with FGP layers [Volume 18, Issue 3, 2016, Pages 78-95]
  • Arefnezhad, Sadegh Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Ariaee, Alireza Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Armaghani, Taher Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Arshadi, Seyed Sina Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2016, Pages 85-104]
  • Arvin Boroujeni, Hadi Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Arvin Boroujeni, Hadi Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2022, Pages 152-177]
  • Arvin Boroujeni, Hadi Buckling analysis of micro-plates reinforced with graphene platelets with piezoelectric face-sheets [Volume 24, Issue 1, 2022, Pages 6-32]
  • Aryanpour, Masoud Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Asadi, Sadegh Analysis of Energy and Exergy of Ammonia Salt Double Effect Absorption Refrigeration System with Solar Collector [Volume 25, Issue 2, 2023, Pages 132-154]
  • Asadzadeh, Zahra Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Asdolah raie, Abolghasem - [Volume 14, Issue 1, 2012, Pages 74-94]
  • Asemi, Kamran Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2021, Pages 183-205]
  • Asgari, Gholamreza Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Asgari, Hosein Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Ashjaee, Mehdi Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Ashnaie Ghasemi, Faramarz Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Ashoori, Amir Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]
  • Ashtian Malayer, Mahdi Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Assadi, Abbas Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Assari, Mohammadreza Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2021, Pages 24-50]
  • Assari, Mohammadreza Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Atarian, Korosh Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2015, Pages 55-80]
  • Ayati, Moosa GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]
  • Ayati, Sepideh Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Ayatolahi, Mojtaba Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Ayatollahi, Majid Reza Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Ayatollahy, Mojtaba Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Azaditalab, Vahid Numerical Study of the Heating System and Solar Radiation Effects on Temperature Variations in a Greenhouse with Glass Walls in Winter [Volume 25, Issue 2, 2023, Pages 57-79]
  • Azarakhsh, Sajad Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load [Volume 21, Issue 3, 2019, Pages 138-157]
  • Azaria, parisa Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]

B

  • Badri, Mohammad Ali Modelling of optimum cleaning of oil spill applying the genetics algorithm [Volume 15, Issue 2, 2013, Pages 6-23]
  • Badrossamay, Mohsen An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Baghani, Mostafa Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Baghani, Mostafa Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Baghani, Mostafa Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Baghani, Mostafa A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Baghani, Mostafa Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Baghani, Mostafa Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Bagheri, Rasool Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Bagheri, Rasoul Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Bagheri, Rasul Stress analysis in an orthotropic non-homogeneous strip sandwiched between two piezoelectric layers weakened by multiple cracks [Volume 19, Issue 3, 2016, Pages 42-63]
  • Bagheri, Rasul Multiple cracks in a functionally graded electro-magneto- elastic rectangular plane [Volume 20, Issue 3, 2018, Pages 80-108]
  • Bagheri, Rasul Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2021, Pages 99-120]
  • Bagheri, Saeed Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Bagheri Tadi, Hamid Reza Thermoelastic Analysis of Rotating FGM Cylindrical Vessels In an Elastic Medium [Volume 20, Issue 3, 2018, Pages 200-212]
  • Bahrami, Arshia Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2022, Pages 57-76]
  • Bahrami, Bahador Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Bahrami, Maryam Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]
  • Bahrami, Mohsen - [Volume 14, Issue 1, 2012, Pages 53-73]
  • Bahrami, Mohsen Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • Bajelan, Mahdi Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Bakhshan, Younes An Exprimental Study on Bubble Growth and Departure in Pool Boiling on Wire Mesh and Providing Empirical Relations [Volume 25, Issue 3, 2023, Pages 136-160]
  • Bal mohammadi, Simin - [Volume 13, Issue 3, 2020, Pages 6-27]
  • Banakar, Mohammad Design of a Neural Network Controller for Flying Robots Using a PIP and a Backstopping Trainer [Volume 24, Issue 4, 2023, Pages 6-28]
  • Banan Nojavani, Ali An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Bani Asadi, Majid Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Baniassadi, Majid Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Baniassadi, Majid Three Dimensional Cell Modeling and Micromechanical Homogenization of Heterogeneous Brain Tissue [Volume 20, Issue 1, 2018, Pages 6-24]
  • Baniassadi, Majid Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Barjesteh, Mohammad Mehdi Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Basalani, Hasan Experimental study of supercavitating flow over a cylindrical body equipped with various activators [Volume 16, Issue 2, 2014, Pages 90-109]
  • Bashiri, Golnaz Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Bashishahabi, Peyman Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Bashoki, Ehsan Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Basirat Tabrizi, Hassan Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Bayat, MohammadReza Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Bayat Komijani, Mostafa Numerical Investigation of Cavitation Erosion in the Venturi using the Eulerian- Lagrangian Method [Volume 25, Issue 4, 2024, Pages 27-50]
  • Bazzaz, Ehsan Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]
  • Bidgoli, Amir Masoud Designing and implementing an infrared control-sensing system to detect air bubbles in the tubes of the peritoneal dialysis machine. [Volume 26, Issue 1, 2024]
  • Bijeh, Navid Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2024, Pages 51-80]
  • Bisheh, Hossein Bending Behavior of Graphene Reinforced Composite Porous Circular and Annular Plates using Three Dimensional Elasticity [Volume 24, Issue 3, 2022, Pages 6-27]
  • Botshekanan, Mohsen Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2022, Pages 152-177]
  • Bot shekanan Dehkordi, Mohsen Temperature dependent analysis of sandwich beams with functionally graded face sheets under local loads [Volume 17, Issue 1, 2015, Pages 83-103]
  • Botshekanan Dehkordi, Mohsen Frequency analysis of sandwich plates with temperature dependent flexible core based on the unified hybrid formulation [Volume 18, Issue 1, 2016, Pages 61-90]
  • Bozorgan, Navid Numerical investigation of thermal performance of water-Ethylene gelicol-Aluminium oxide in diesel engine radiator of automotive [Volume 14, Issue 4, 2012, Pages 76-92]

C

  • Chahartaghi, Mahmood Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Chahartaghi, Mahmood Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2020, Pages 220-238]
  • Chaibakhsh, Ali Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2022, Pages 114-130]
  • Cheraghpour, Farzad Design of an exoskeleton robot for rehabilitation of people with movement disabilities [Volume 23, Issue 1, 2021, Pages 170-193]
  • Chitsaz, Ata Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]

D

  • Dadrasi, Ali Experimental study of quasi-static behavior of sandwich panel with metal/glass fiber trapezoidal core under Transverse loading [Volume 26, Issue 1, 2024]
  • Dardel, Morteza Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Dardmand, Reza Diagnosing Simultaneous Faults of Bearing and Misalignment in Induction Motor using Combined Method of Bispectrum Analysis of Vibration Signal and KNN Algorithm [Volume 25, Issue 3, 2023, Pages 6-27]
  • Darvize, Abolfazl Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Darvize, Mansoor Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Darvizeh, Abolfazl Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Darvizeh, Abolfazl - [Volume 14, Issue 1, 2012, Pages 6-19]
  • Darvizeh, Abolfazl - [Volume 13, Issue 3, 2020, Pages 39-63]
  • Darvizeh, Mansor - [Volume 14, Issue 1, 2012, Pages 6-19]
  • Darvizeh, Mansour Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Davari, Ali Reza Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2022, Pages 133-154]
  • Deghanzadeh, Ahmad Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Dehghani mohammadabadi, Mohsen Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]
  • Dehghan Manshadi, Mojtaba Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2019, Pages 210-233]
  • Dehrouyeh, Zahra Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Deimi dasht bayaz, Mehdi - [Volume 13, Issue 4, 2011, Pages 32-45]
  • Deimi Dasht Bayaz, Mahdi - [Volume 14, Issue 4, 2012, Pages 32-45]
  • Deldar Sheikhi, javad Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2022, Pages 133-154]
  • Derijani, Hosein Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Deylami, Hamed Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Deymi-Dashtebayaz, Mahdi Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Dhojaei Fard, Mohammad Hasan Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Djavareshkian, M.H. Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2015, Pages 25-54]
  • Doostali, Ali numerical simulation of heat transfer in a cavity with discrete heat source using lattice Boltzmann method [Volume 19, Issue 4, 2017, Pages 75-100]

E

  • Ebrahimi, Behrooz - [Volume 14, Issue 1, 2012, Pages 53-73]
  • Ebrahimi, Mina Sadat simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Ebrahimi, Saeed Energy analysis of flexible multibody systems with internal damping under impact condition [Volume 19, Issue 1, 2016, Pages 101-117]
  • Ebrahimi Fakhari, Hadi Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Ebrahimi Moghadam, Amir Develop an equation to calculate the amount of gas leakage from buried distribution gas pipelines [Volume 18, Issue 2, 2016, Pages 64-86]
  • Ebrahiminejad, Salman Three-Dimensional Parametric Modeling of Axial-Flux Eddy-Current Braking System with Effects of Skin Depth and Temperature [Volume 23, Issue 4, 2022, Pages 155-177]
  • Ebrahiminejad, Salman Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2024, Pages 81-99]
  • Ebrahimi-Nejad, Salman Steer-By-Wire Vehicle Control after Tire Burst with Adaptive Sliding Mode Control [Volume 25, Issue 2, 2023, Pages 80-111]
  • Eftari, Mohammad - [Volume 13, Issue 3, 2020, Pages 79-102]
  • Eftekhari, Syamak Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Eftekhari Nasab, Afshin Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Eftekhari Yazdi, Mohammad Droplet formation in microchannel under influence of electric field using the Boltzmann lattice method [Volume 18, Issue 2, 2016, Pages 42-63]
  • Eghbalpoor, Roozbeh Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Ehghaghi, Mir Biuk The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Ehteshami Bejnordi, Vahid analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2022, Pages 93-113]
  • Eisa Gholian, َAlex Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Elhami, Mohammad Reza Effect of Pitch Variation on a Propeller Frequencies Analytically, Numerically and Experimentally [Volume 25, Issue 3, 2023, Pages 28-51]
  • Emamifar, Armin Energy, exergy and economic analysis of an improved hybrid cascaded compression-absorption refrigeration system [Volume 22, Issue 4, 2021, Pages 172-204]
  • Enteshari, Nahid The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Esfahanian, Vahid Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Esfandyari, Mohammad Javad Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Eslami, Mohammad Reza Nonlinear Axisymmetric, Thermally Induced Vibrations of a Functionally Graded Spherical Cap [Volume 20, Issue 3, 2018, Pages 133-169]
  • Esmaeili, Hamidreza Nonlinear forced vibration of clamped-free beam reinforced by carbon nanotubes with an attached mass [Volume 21, Issue 3, 2019, Pages 158-180]
  • Esmaeili, Kazem Comparison of one-dimensional two-fluid models to predict two-phase gas-liquid flow variables in a vertical pipe and determination of an appropriate model [Volume 20, Issue 4, 2019, Pages 26-53]
  • Etemadi Haghighi, Shahram Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Etemadi Haghighi, Shahram Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2022, Pages 178-204]
  • Etemadi Haghighi, Shahram Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]

F

  • Faezian, Ali Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2014, Pages 55-68]
  • Fakoor, Mahdi Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Falahi, Farzad Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Falavand Jozaei, Ali Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Fallah, Mohsen Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Fallahi, Farzad Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Fanaee, sayyed Aboozar Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2019, Pages 6-25]
  • Farahpour, Hengameh Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2016, Pages 23-40]
  • Faraji Mahyari, Khadijeh Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Faraji Mahyari, Zahra Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Farbod, Mansoor An investigation of thermal conductivity dependence of hybrid nanofluids containing carbon nanotubes on temperature and time [Volume 22, Issue 2, 2020, Pages 74-84]
  • Farhangian Marandi, omid Numerical investigation of heat transfer and power generation of combined thermoelectric generators and Photovoltaic-Thermoelectric hybrid system embedded in the solar cavity [Volume 21, Issue 2, 2019, Pages 29-55]
  • Farhang Mehr, Vahid Experimental study of supercavitating flow over a cylindrical body equipped with various activators [Volume 16, Issue 2, 2014, Pages 90-109]
  • Farhang Mehr, Vahid - [Volume 13, Issue 4, 2011, Pages 7-18]
  • Farhani, Foad Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2016, Pages 69-84]
  • Farhani, Foad Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Farivar, Faezeh Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Farokhi, Navid Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Farshidian far, Alireza Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Farshidian Far, Anooshirvan Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Farshidiyan far, Anoshirvan - [Volume 14, Issue 1, 2012, Pages 20-39]
  • Fartash, Amirhossein Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings [Volume 24, Issue 4, 2023, Pages 83-108]
  • Farzaneh gord, Mahmood - [Volume 13, Issue 4, 2011, Pages 32-45]
  • Farzaneh Gord, Mahmood - [Volume 14, Issue 4, 2012, Pages 32-45]
  • Farzaneh-Gord, Mahmood Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Farzin, Mahmood Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Fathi, Mohsen Control of pitch angle of a flexible launch vehicle with model predictive control approach using neural networks [Volume 18, Issue 1, 2016, Pages 22-40]
  • Fazaeli, Reza Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]
  • Fazelpour, MOHAMMADREZA Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Felegari, Ali.Haydar Comparison of the Efficiency of the Linear Cost function Versus the Two-squared Cost Function in the Analytical Solution of Actuator Redundancy in a Cable [Volume 24, Issue 3, 2022, Pages 28-48]
  • Feli, Saeed Effects of geometric configurations of corrugated cores on the impact loading and energy absorption of sandwich panels with composite face sheets [Volume 26, Issue 1, 2024]
  • Foroozmehr, Ehsan An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Forotan, Mehrdad - [Volume 13, Issue 3, 2020, Pages 28-38]
  • Fotohi, Ali Reza - [Volume 14, Issue 3, 2012, Pages 71-94]

G

  • Gandjalikhan Nassab, Seyed Abdolreza Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2016, Pages 60-79]
  • Geramizadeh, Hosein Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Ghadimi, Mohammad Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Ghadimi, Mojtaba Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Ghadiri, Hamid Robust Position Tracking of Magnetic Suspension System Using the Sliding Mode Controller based on Inertial Delay Control [Volume 23, Issue 1, 2021, Pages 194-220]
  • Ghadiri, Hamid Fuzzy Dynamic Output Feedback Controller Design for Position Control of a Two-Link Robot [Volume 23, Issue 2, 2021, Pages 199-219]
  • Ghaedi, Esmael Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Ghaemi, Narjes Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Ghaemi Osgouie, Kambiz Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Ghafari, Ali Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Ghafari, Amir A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Ghafarirad, Hamed Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2022, Pages 178-200]
  • Ghaffari, A. development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2021, Pages 206-227]
  • Ghaffari, A. Design of an exoskeleton robot for rehabilitation of people with movement disabilities [Volume 23, Issue 1, 2021, Pages 170-193]
  • Ghaffari, Ali A novel algorithm for detection of speaker emotion for interaction between human and robot [Volume 20, Issue 1, 2018, Pages 92-109]
  • Ghaffari, Ali Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Ghaffari, Ali Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Ghaffari, Ali fuzzy model reference learning control for underactuated segway robot [Volume 21, Issue 3, 2019, Pages 5-26]
  • Ghaffari, Ali Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Ghaffari, Ali A new three-dimensional Time Vector Electrocardiogram Modeling and its Applications [Volume 24, Issue 3, 2022, Pages 120-133]
  • Ghaffari, Ali Design of Planning System for Automatic Turning Mission of Autonomous Car on Narrow and Wide Roads [Volume 24, Issue 4, 2023, Pages 29-60]
  • Ghafouri, Ashkan Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Ghahremani, Payam Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Ghanbari Arzili, Mohammad Hossein Numerical Investigation of Double Pipe Heat Exchanger with Nanofluid Inside Helically Corrugated Tube in the Presence of Magnetic Field [Volume 25, Issue 3, 2023, Pages 52-83]
  • Ghannad, Mehdi Elasto-plastic analysis of thick-walled cylinder using with perturbation technique and radial return method [Volume 26, Issue 1, 2024]
  • Ghannad, Mehdi Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Gharakhanloo, Mozhgan Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2014, Pages 39-54]
  • Gharib, Mohammadreza Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]
  • Gharooni, Hamed Analytical solution for buckling analysis of axisymmetric cylindrical shell under axial load using shear deformation theory [(Articles in Press)]
  • Ghasemi, Azam - [Volume 13, Issue 3, 2020, Pages 64-78]
  • Ghasemi, Ismail Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Ghasemi, Majid Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Ghasemi, Milad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Ghasemi, Mohammasd Hasan Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Ghasemi marzbali, Iman Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Ghazanfarian, Jafar 3D Blood Flow Simulation in Artificial Heart with Double Volute using Dynamic Mesh Method [Volume 19, Issue 2, 2016, Pages 6-22]
  • Ghazi, Mehrangiz Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Ghazi, Mehrangiz Analytical solution of flow and heat transfer in a three-tube heat exchanger consisting of evaporator and condenser partially filled with porous media [Volume 24, Issue 2, 2022, Pages 160-190]
  • Ghaznavi, aidin Modified Global-local theory for investigating composite and sandwich plates under static transverse loading [Volume 20, Issue 1, 2018, Pages 132-151]
  • Ghaznavi, Aydin Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Ghodosian, Ali Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Gholami, Abolfazl Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2022, Pages 114-132]
  • Gholami, Ali Experimental study of supercavitating flow over a cylindrical body equipped with various activators [Volume 16, Issue 2, 2014, Pages 90-109]
  • Gholami, Raheb Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Gholami, Raheb Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Gholami, Yoosef Investigation of the axial buckling and dynamic stability of functionally graded microshells based on the modified coupled stress theory [Volume 16, Issue 1, 2014, Pages 78-102]
  • Gholizadeh, Mohammad Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Ghomashi, Hosein Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2015, Pages 55-80]
  • Ghorbani Firouzsalari, Mehdi Numerical study of non-uniform axial magnetic field effect on bubble growth in a boiling flow of nano ferro fluid in a microchannel [Volume 17, Issue 4, 2016, Pages 46-68]
  • Ghoreishi, Majid Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2022, Pages 61-74]
  • Ghotbinasab, Samira Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Godarzi, Koroush - [Volume 14, Issue 2, 2012, Pages 46-59]
  • Golbaghi Masouleh, Seyed Saeid Analytical solution of flow and heat transfer in a three-tube heat exchanger consisting of evaporator and condenser partially filled with porous media [Volume 24, Issue 2, 2022, Pages 160-190]
  • Golestanian, Hossein Investigating the effects of length, diameter and chirality on the mechanical properties of defective carbon nanotubes [Volume 21, Issue 1, 2019, Pages 188-217]
  • Golestanian, Hossein Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Golnari-Ardakani, Abbas Improvement in performance of the boilers in 4th refinery of south pars gas complex by energy and exergy analysis [Volume 20, Issue 2, 2018, Pages 72-91]
  • Golzari, Masoud Free vibration and instability study of conveying fluid carbon nanotubes based on the Donnel-cylindrical shell theory [Volume 15, Issue 3, 2013, Pages 73-99]
  • Goodarzi, Kourosh Estimation of fouling profile in a heat exchanger pipe applying the conjugate gradient method based on the inverse algorithm [Volume 17, Issue 4, 2016, Pages 23-45]
  • Gorji, Mofid The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2016, Pages 41-59]
  • Goudarzi, Koorosh Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]
  • Goudarzi, Koorosh Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]
  • Goudarzi Hafshejani, Sahar Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]

H

  • Habibnejad Korayem, Moharam Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Habib nezhad koraym, Moharam - [Volume 14, Issue 1, 2012, Pages 53-73]
  • Haghighat, Heshmat allah A new velocity field for analysis of rod drawing process through curved dies [Volume 23, Issue 2, 2021, Pages 1-22]
  • Haghighatpars, Assal Task space path following for planar redundant robots using Pontryagin’s principle in optimal control [Volume 22, Issue 1, 2020]
  • Haj Heidari, Hesam Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Haji Rasooli, Masood Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Hajizadeh Aghdam, Abolfazl Feasibility and exergoeconomic analysis of a cogeneration system for a hospital based on the solar organic Rankine cycle in Iran [Volume 21, Issue 4, 2020, Pages 197-219]
  • Hamedi, Mohammad Hosein Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Hamidi Majd, Amir Masoud Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Hamisi, Mohammad Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Hamzehloo, Seyed Reza Impedance-based structural health monitoring of a Aluminium frame [Volume 22, Issue 1, 2020]
  • Hamze Shalamdari, Soghra Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Hanafi zadeh, Pedram Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Hasani, Alireza Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Hashemi, Leila Design of Nonlinear Shock Absorber with Magnetic Eddy Current Damper for Sequential Impact [Volume 25, Issue 2, 2023, Pages 112-131]
  • Hashemi, Raziyeh Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Hashemi, Seyed Hojat Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Hashemi, Seyyed Hojjat Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]
  • Hashemian, Mohammad Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]
  • Hassanpour, Hussein Three-Dimensional Parametric Modeling of Axial-Flux Eddy-Current Braking System with Effects of Skin Depth and Temperature [Volume 23, Issue 4, 2022, Pages 155-177]
  • Hatami, Hossein Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Hedayatpour, Mehdi Experimental Study of Small Scale Drip Irrigation Using Positive Displacement Solar Pump in Direct Coupling Conditions [Volume 21, Issue 4, 2020, Pages 220-238]
  • Heidari, Hamidreza dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Heydari, Tohid Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2019, Pages 118-136]
  • Hirbodi, Kamran Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Honarvar, Farhang - [Volume 14, Issue 3, 2012, Pages 95-111]
  • Hooshmand, Payam Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2015, Pages 98-122]
  • Hooshmand, Payam Experimental Investigation a type of evaporation-based solar desalination system 1.5 liter with the photovoltaic and heat pipe technologies [Volume 19, Issue 4, 2017, Pages 18-35]
  • Hoseini, Seyed Saeed Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Hosein zadeh, Mohammad - [Volume 14, Issue 1, 2012, Pages 20-39]
  • Hossaini, Seyed Amir Reza - [Volume 14, Issue 2, 2012, Pages 60-76]
  • Hossaini tehrani, Parisa - [Volume 13, Issue 3, 2020, Pages 6-27]
  • Hossain jalaei, Mohammad - [Volume 13, Issue 3, 2020, Pages 79-102]
  • Hosseinalipour, Seyed Mostafa Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Hosseini, Mojtaba Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Hosseini, Rouhollah Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Hosseini, Rouhollah Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2022, Pages 93-113]
  • Hosseini, Seyyed Mohammad Hossein Free vibration analysis of rotating functionally graded microbeams [Volume 23, Issue 3, 2022, Pages 152-177]
  • Hosseinian, Ali experimental study of the effect of multi wall Carbon nano tube - water nano fluid on heat transfer in a non metallic double pipe heat exchanger [Volume 20, Issue 2, 2018, Pages 40-53]
  • Hosseini Salari, Ali Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Hosseini Tehrani, Parisa -- [Volume 14, Issue 3, 2012, Pages 6-30]
  • Hossein Ovich, Gomer - [Volume 14, Issue 1, 2012, Pages 40-52]
  • Hossein zadeh, Ali Experimental and numerical investigation of notch depth effect on Charpy fracture energy in API X65 steel [Volume 23, Issue 2, 2021, Pages 24-48]

I

  • Imam, Ali Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2022, Pages 29-60]
  • Imani, Kazem Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2022, Pages 6-28]
  • Imani, Kazem Adaptive Observer and Fault Tolerant Adaptive Optimal Sliding Mode Controller Designing for 3DOF Helicopter Model in presence of Fault and Actuator Saturation [Volume 23, Issue 4, 2022, Pages 6-28]

J

  • Jafaizaveh, Mohammad Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Jafarbigi, Ehsan Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Jafaree, Mohsen Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2017, Pages 55-71]
  • Jafari, Aliasghar Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Jafari, Moharram The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Jafarian, Naghme Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Jafari Nasr, Mohammadreza Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Jahanpor, Javad Laboratory study and simulation of the effect of geometric changes of the plate heat exchanger in improving its performance. [Volume 22, Issue 4, 2021, Pages 154-171]
  • Jahromi, M. Numerical simulation of the effect of tip clearance on axial flow compressor performance [Volume 19, Issue 2, 2016, Pages 96-122]
  • Jalayeri gharahghonlou, Ali Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Jamali, Ali Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2022, Pages 114-130]
  • Jamali, Jalil Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Jamshidi, Afshin Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Jamshidmofid, Mohammad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Jangharban, Amir - [Volume 14, Issue 3, 2012, Pages 51-71]
  • Janghorban, Maziar Effect of Nanotubes Agglomeration on Bending Behavior of Trapezoidal Nanocomposites Reinforced with Carbon Nanotubes [Volume 25, Issue 1, 2023, Pages 60-79]
  • Javadi, Ali One and two dimensional inviscid and two dimensional viscid flow analysis using the kinetic energy preserving scheme [Volume 14, Issue 4, 2012, Pages 93-117]
  • Javarashkian, Mohammad Hasan Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Javidavaloo, Ebrahim Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]
  • Jazayri, Seyed Ali - [Volume 14, Issue 2, 2012, Pages 6-29]
  • Jedari Salami, Sattar Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]
  • Jedari Salami, Sattar Theoretical, numerical, and experimental investigations of 3D printed sandwich beams subjected to three-point bending [Volume 24, Issue 2, 2022, Pages 134-159]
  • Joodzadeh, Amir Effect of environmental parameters on operation of Ramin planet cooling towers with using different packings [Volume 16, Issue 2, 2014, Pages 22-37]

K

  • Kadivar, Amin Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2019, Pages 182-209]
  • Kadkhodaie, Mahmood Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Kadkhodaie, Mahmood An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Kadkhodayan, Mehran Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Kakaei, MohammadMahdi analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2022, Pages 93-113]
  • Kardgar, Amin Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Kargar estahbanati, Arash Finite strain swelling induced bending in bilayer gels: semi-analytical and numerical approaches [Volume 22, Issue 1, 2020]
  • Karimdoost Yasuri, Amir Experimental Study of the dynamics of droplet impact on the viscoelastic Substrate [Volume 19, Issue 2, 2016, Pages 80-95]
  • Karimi, Abolfazl Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Karimpour, Morad Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Kashaninia, Abdorreza Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Kazemi, Amin A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Kazemi, Mohammad Javad Numerical Analysis of Located of Angle Sister Holes Effect on the Film Cooling Effectiveness [Volume 20, Issue 2, 2018, Pages 129-152]
  • Kazemi, Reza Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Kazemnejad, Azam Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Kazemshahi, Behnam Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Kazemy, Ali Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2021, Pages 121-141]
  • Keshavarzpour, Hemad Effects of high-power high-frequency acoustic noise on the performance of MEMS vibratory gyroscopes [Volume 23, Issue 3, 2022, Pages 75-92]
  • Khakpour, Mahdi Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2022, Pages 77-92]
  • Khaleghi, Ali Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Khalilarya, Shahram Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]
  • Khanali, Majid Evaluation of the ability of meteorological parameters in the prediction of the average solar radiation in a coastal city in Iran [Volume 20, Issue 2, 2018, Pages 115-128]
  • Khandan, Mohsen Numerical investigation of the effects of geometry variation on the flow pattern and performance of Gas-Particle cyclones [Volume 19, Issue 4, 2017, Pages 101-122]
  • Khanin, Hamid Comparison of shear fracture surfaces of drop weight and charpy test samples in thermomechanical steel [Volume 16, Issue 3, 2014, Pages 67-78]
  • Khatibzadeh, Ahmad Ali Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2016, Pages 23-40]
  • Khayatzadeh, Farid The Effect of ECO-Energy Design on Energy Consumption in Pumping Plants [Volume 25, Issue 3, 2023, Pages 113-135]
  • Khodadadi, Ali Multiscale modeling of hybrid nanocomposites using molecular dynamics, micromechanics, and finite element methods [Volume 24, Issue 1, 2022, Pages 60-85]
  • Khodadadi, Hamed Robust Position Tracking of Magnetic Suspension System Using the Sliding Mode Controller based on Inertial Delay Control [Volume 23, Issue 1, 2021, Pages 194-220]
  • Khodadadi, Hamed Fuzzy Dynamic Output Feedback Controller Design for Position Control of a Two-Link Robot [Volume 23, Issue 2, 2021, Pages 199-219]
  • Khodaei Meidanshah, Mohammad Ehsan Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2019, Pages 210-233]
  • Khodarahmi, Hossein Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Khodayari, Alireza Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Khodayari, Alireza Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Khodayari, Alireza Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Khodayari, Alireza Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Khodayari, Alireza Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Khodayari, Alireza development an intelligent system for discretionary lane change behaviors in the real traffic flow [Volume 22, Issue 3, 2021, Pages 206-227]
  • Khodayari, Alireza Designing and implementing an infrared control-sensing system to detect air bubbles in the tubes of the peritoneal dialysis machine. [Volume 26, Issue 1, 2024]
  • Khondabi, Reza Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Khoogar, Ahmad Reza Kinematic Design and Optimization of Geometrical Dimensions of a Four Degrees of Freedom Hybrid Robot Manipulator [Volume 23, Issue 3, 2022, Pages 131-151]
  • Khooshehchin, Mohsen Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Khoshnevis, Amir Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Kiani, Abolfazl Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Kiani, Yaser Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2016, Pages 108-126]
  • Kiani, Yaser Thermoelastic Analysis of Rotating FGM Cylindrical Vessels In an Elastic Medium [Volume 20, Issue 3, 2018, Pages 200-212]
  • Kiani, Yaser Free Vibration Analysis of Twisted Composite Beam Reinforced with Graphene Platelets [Volume 25, Issue 1, 2023, Pages 128-167]
  • Komeh, Afshin Effects of geometric configurations of corrugated cores on the impact loading and energy absorption of sandwich panels with composite face sheets [Volume 26, Issue 1, 2024]
  • Koochakianfard, Omid Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]

L

  • Lashgaroo, Mojtaba Experimental study of quasi-static behavior of sandwich panel with metal/glass fiber trapezoidal core under Transverse loading [Volume 26, Issue 1, 2024]
  • Lashkar por, Seyed Mehdi - [Volume 14, Issue 2, 2012, Pages 30-44]
  • Loh Moosavi, Mohsen Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Lotfan, Saeed Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Lotfavar, Amir Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Lotfi, Farzaneh Numerical Study of the Heating System and Solar Radiation Effects on Temperature Variations in a Greenhouse with Glass Walls in Winter [Volume 25, Issue 2, 2023, Pages 57-79]

M

  • Mafakheri, M. Numerical simulation of the effect of tip clearance on axial flow compressor performance [Volume 19, Issue 2, 2016, Pages 96-122]
  • Maghsoodpour, Adel Design and Implementation of an Intelligent Collision Avoidance System based on Delay of Driver-Vehicle Unit [Volume 21, Issue 1, 2019, Pages 54-71]
  • Maghsoudpor, Adel Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2022, Pages 29-60]
  • Maghsoudpour, Adel Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2022, Pages 178-204]
  • Mahbadi, Hossein Numerical simulation of thermoacoustic refrigerator and study of resonator length and working fluid on its operation [Volume 18, Issue 2, 2016, Pages 6-21]
  • Mahbadi, Hossein Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Mahdavi, Mohammad mehdi A new velocity field for analysis of rod drawing process through curved dies [Volume 23, Issue 2, 2021, Pages 1-22]
  • Mahdi, MirAlam Numerical Investigation of Cavitation Erosion in the Venturi using the Eulerian- Lagrangian Method [Volume 25, Issue 4, 2024, Pages 27-50]
  • Mahinabad, Hossein Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Mahjoub Moghadas, Saeed Determination of appropriate torsional damper for reduction of vibrations amplitude of ultralight aircrafts engine [Volume 23, Issue 4, 2022, Pages 205-221]
  • Mahmoodabadi, Mohammad Javad Optimal Determination of the Wing Flexibility Parameter for Computing the Aerodynamic Forces Exerted on a Flapping-wing Robot Based on the Genetic Algorithm [Volume 25, Issue 1, 2023, Pages 97-127]
  • Mahmoodi, M. Numerical simulation of the effect of tip clearance on axial flow compressor performance [Volume 19, Issue 2, 2016, Pages 96-122]
  • Mahmoodi, Mahdi The non-dimensional diagram of automatic line-break control valve performance domain in gas transportation pipeline [Volume 19, Issue 2, 2016, Pages 41-59]
  • Mahmoodi Monfared, Mojtaba Outplane stress analysis of a functionally graded strip bounded with two elastic half plane including several finite cracks in interfacial zone between the strip and half plane [Volume 18, Issue 3, 2016, Pages 45-60]
  • Mahmoodi Monfared, Mojtaba Multiple cracks in a functionally graded electro-magneto- elastic rectangular plane [Volume 20, Issue 3, 2018, Pages 80-108]
  • Mahmoudi, Mostafa - [Volume 13, Issue 4, 2011, Pages 77-103]
  • Mahmoudi Monfared, Mojtaba Computation of stress intensity factors in a functionally graded orthotropic half-plane weakened by multiple edge cracks under impact loading [Volume 22, Issue 3, 2021, Pages 99-120]
  • Majidi, Vahid Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Malek Hosseini, Zohreh Vibration Analysis of Kirchhoff micro plate with C2 Continuity [(Articles in Press)]
  • Maleki, Sattar Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2024, Pages 6-26]
  • Malekizadeh, Mehdi Numerical Simulation on the Effect of Magnetic Field Changes, Screw Pitch and Angle of the Spiral Tube on Heat Transfer Enhancement [(Articles in Press)]
  • Malekzadeh, Maryam Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Malekzadeh Fard, Keramat Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Mallahi kolahi, pouya ِDerivation of nonlinear dynamic equations of tractor-trailer mobile robots and their motion control employing input-output linearization control method [Volume 24, Issue 2, 2022, Pages 92-106]
  • Mamandi, Ahmad An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Mani, Mahmood Frequency analysis of vibrating Gurney flapped airfoil applying a hot- wire [Volume 15, Issue 4, 2014, Pages 39-54]
  • Mani, Mahmoud - [Volume 13, Issue 4, 2011, Pages 46-76]
  • Marefat, Mehdi Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Marefat, Mehdi - [Volume 14, Issue 2, 2012, Pages 60-76]
  • Mashayekhi, Mohammad Ali Optimization of vortex tube parameters to achieve the minimum possible temperature [Volume 24, Issue 2, 2022, Pages 107-133]
  • Masih-Tehrani, Masoud Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Masih-Tehrani, Masoud Steer-By-Wire Vehicle Control after Tire Burst with Adaptive Sliding Mode Control [Volume 25, Issue 2, 2023, Pages 80-111]
  • Masoomi Asiabi, Reza Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Matloobi, Mostafa Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Mazaheri, Kiomars Comparison of predictive models of air-fuel cloud shock wave parameters [Volume 14, Issue 4, 2012, Pages 55-75]
  • Mazaheri Badi, Kiumars Study of diameter and humidity of particles on refused derived fuel [Volume 15, Issue 2, 2013, Pages 78-97]
  • Mazidi, Mohsen Experimental study of effects of windbreaker walls for increasing flow rate of Heller cooling tower [Volume 17, Issue 4, 2016, Pages 69-84]
  • Mazidi, Mohsen Analytical and field study of environmental parameters affecting on performance of Heller cooling towers from economical point of view [Volume 17, Issue 2, 2015, Pages 68-82]
  • Mazidi, Mohsen Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2015, Pages 81-97]
  • Mazidi, Mohsen Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2020, Pages 149-173]
  • Mazrooie, Mohsen Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Meghdadi Esfahani, Amir Homayoon Improving the performance of lattice Boltzmann method in order to numerical study of gas flows in nano scale porous media [Volume 18, Issue 2, 2016, Pages 87-105]
  • Mehdipour, Ramin Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2016, Pages 6-22]
  • Mehdipour, Ramin Effects of nanofluids on the boiling-mode cooling of the engine [Volume 20, Issue 4, 2019, Pages 54-77]
  • Mehrabi, Ali Experimental Study of the Ground Effects on Performance of Model Tandem-Rotor Helicopter in Hover Flight [Volume 23, Issue 4, 2022, Pages 133-154]
  • Mehregan, Mahmood Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2024, Pages 100-134]
  • Mehrfarzam, Nasim Design and Implementation of a Novel Algorithm for Optimal Building’s HVAC Systems Selection [Volume 20, Issue 3, 2018, Pages 59-79]
  • Minaei, Masoud Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Mirabdolah Lavasani, Arash Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Mirabdollah lavasani, Arash Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]
  • Mirabdollah Lavasani, Arash Influence of Aspect Ratio of Rectangular Enclosure and Nanoparticles Volume Fractions on Natural Convection Heat Transfer of Al2O3-Water Nanofluid; A numerical study [Volume 20, Issue 2, 2018, Pages 153-169]
  • Mirabolah Lavasani, Arash An experimental study on drag coefficient of a cam-shaped tube with different aspect ratios [Volume 21, Issue 2, 2019, Pages 75-91]
  • Miradollah Lavasni, Arash Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2016, Pages 6-22]
  • Mirbeigi Moghadam, Amirreza Model Predictive Controller Design for Lateral Behavior in Real Traffic Flow [Volume 22, Issue 1, 2020]
  • Mirdamadi, Hamid Reza Vibrational formulation and analysis of Levy cross-ply laminar plates applying spectral finite element method [Volume 15, Issue 1, 2013, Pages 21-35]
  • Miri, Seyedeh Mohadeseh Design and Analysis of Energy, Exergy and Economy of the Sub-cooled Compressed Air Energy Storage System (SCAES) [Volume 25, Issue 2, 2023, Pages 6-39]
  • Miri, Seyed Ziaoldin Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Miripour Fard, Behnam Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2021, Pages 80-98]
  • Mirmohammadi, Ali Optimization of vortex tube parameters to achieve the minimum possible temperature [Volume 24, Issue 2, 2022, Pages 107-133]
  • Mirzaei, Mostafa Mechanical Buckling of FG-CNT Reinforced Composite Cylindrical Panels [Volume 22, Issue 1, 2020]
  • Mirzaeinejad, Hossein Wheel Slip Control Enhancement Considering Pitch Dynamics, and Neural-Network-Based Wheel Slip Reference Model [(Articles in Press)]
  • Mirzagheytani, Amir Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2016, Pages 85-104]
  • Mirzaie, A.M. Calculation of asymptotic stress field, Stress intensity factors and higher order terms in key-hole notches [Volume 21, Issue 3, 2019, Pages 225-243]
  • Mirzamohammad, Amin Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2015, Pages 55-80]
  • Moaref Doost, Mehdi Elastoplastic buckling analysis of rectangular plates applying incremental and deformational theories of plasticity [Volume 15, Issue 1, 2013, Pages 36-81]
  • Moavenian, Mohammadreza Numerical study of change of length and non-uniform potential power of Zeta in micro-channels with branches are assessed by electroosmotic flow [Volume 16, Issue 4, 2015, Pages 25-54]
  • Moayedi, Hesam Numerical analysis of flow field and heat transfer affected by Electrohydrodynamic actuator using micropolar model [Volume 21, Issue 2, 2019, Pages 133-154]
  • Moayyedi, Mohammad Kazem Development of Electromagnetic Flowmeters Model using a Hybrid Approach Based on Numerical Simulation Results and Data Estimation Method [Volume 24, Issue 4, 2023, Pages 109-128]
  • Moayyedi, Mohammad Kazem Numerical Study of the Heating System and Solar Radiation Effects on Temperature Variations in a Greenhouse with Glass Walls in Winter [Volume 25, Issue 2, 2023, Pages 57-79]
  • Moazam, Mohammad ali - [Volume 13, Issue 3, 2020, Pages 64-78]
  • Mobarhan, Marzieh An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Modares Razavi, Mohammad Reza Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2014, Pages 55-68]
  • Modarresi, Ali Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Moetakef-Imani, Behnam Boring bar chatter control using a novel adaptive direct velocity feedback controller [Volume 23, Issue 1, 2021, Pages 85-109]
  • Moghaddam, Majid Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2024, Pages 135-154]
  • Mohaddes Deylami, Hamed Numerical investigation of flow separation control in an axial compressor cascade by plasma actuation [Volume 20, Issue 4, 2019, Pages 182-209]
  • Mohamadzadeh, Parviz Design for reliability: optimization of critical structures using cross-entropy reliability analysis [Volume 20, Issue 3, 2018, Pages 41-58]
  • Mohammadi, Faezeh Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Mohammadi, Hassan Isogeometric Analysis of Free vibration of Composite Beams Reinforced with Graphene Platelets Based on a Refined Quasi-3D Theory [(Articles in Press)]
  • Mohammadi, Maryam Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Mohammadi, Mehrdad Numerical analysis of air flow specification in solar chimneys with vegetation layer [Volume 17, Issue 4, 2016, Pages 6-22]
  • Mohammadi, Mesam Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Mohammadi, Tahere Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Mohammadi, Yoones Temperature dependent analysis of sandwich beams with functionally graded face sheets under local loads [Volume 17, Issue 1, 2015, Pages 83-103]
  • Mohammadi Amin, Meysam Numerical Simulation of Body-Fluid-Structure Interactions For a Flexible Stabilizer Attached to Free Flying Object [Volume 21, Issue 2, 2019, Pages 155-177]
  • Mohammadidoust, Akbar Experimental investigation of the heat transfer coefficient in pool boiling using bubble dynamic in three aqueous, electrolyte and nanofluid solutions [Volume 22, Issue 2, 2020, Pages 176-196]
  • Mohammadi Hooyeh, Hadi Buckling analysis of double – bonded micro beam based on Reddy – Levinson model using differential quadrature method [Volume 21, Issue 3, 2019, Pages 53-78]
  • Mohammadi Karachi, Arash Numerical investigation of effective parameters of heat transfer in porous cavity with a cylinder using Lattice Boltzmann Method [Volume 22, Issue 4, 2021, Pages 205-240]
  • Mohammad Karimi Yazdi, Hossein Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Mohammadkhani, Farzad Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2015, Pages 6-24]
  • Mohammad Khani, Farzad Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Mohammadpour fard, Mousa Numerical study of non-uniform axial magnetic field effect on bubble growth in a boiling flow of nano ferro fluid in a microchannel [Volume 17, Issue 4, 2016, Pages 46-68]
  • Mohammadzadeh, Alireza Hydro-elastic vibration analysis of functionally graded circular plate vertically in contact with stationary fluid [Volume 21, Issue 1, 2019, Pages 72-96]
  • Moharami, Rasoul -- [Volume 14, Issue 3, 2012, Pages 29-47]
  • Moharampour, Ali Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Mohmmadi, Younes Frequency analysis of sandwich plates with temperature dependent flexible core based on the unified hybrid formulation [Volume 18, Issue 1, 2016, Pages 61-90]
  • Mohsenzadeh, Mohsen Impedance-based structural health monitoring of a Aluminium frame [Volume 22, Issue 1, 2020]
  • Mohyeddin, Ali An investigation on effect of surface stress in buckling stability of a nanotube using modified nonlocal theory of elasticity [Volume 21, Issue 3, 2019, Pages 197-224]
  • Mojaver, Parisa Exergy and environmental analysis of a power and heat co-generation system fed by rice husk [Volume 21, Issue 4, 2020, Pages 59-82]
  • Mokhlesi, Mohsen Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2014, Pages 69-89]
  • Mokhtari, M. Abolfazl Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2021, Pages 88-115]
  • Mokhtari, M. Abolfazl Thermal stability analysis of cylindrical shell reinforced with GPL graphene sheets using differential squares method [Volume 22, Issue 4, 2021, Pages 51-71]
  • Mokhtari, M. Abolfazl Feedback Linearization Fractional Order PID Controller Tuned By Neural Networks Theorem [Volume 23, Issue 1, 2021, Pages 110-129]
  • Mokhtari, M. Abolfazl Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2022, Pages 6-28]
  • Mokhtari, M. Abolfazl Adaptive Observer and Fault Tolerant Adaptive Optimal Sliding Mode Controller Designing for 3DOF Helicopter Model in presence of Fault and Actuator Saturation [Volume 23, Issue 4, 2022, Pages 6-28]
  • Mokhtari, M. Abolfazl Design and implementation of model-free adaptive robust sliding mode controller for 3-DOF helicopter model by using time delay estimation [Volume 24, Issue 1, 2022, Pages 143-159]
  • Mokhtari, M. Abolfazl Real time Detection and Tracking of the Target Object using the Yolov3 Network by the Flying Robot [Volume 24, Issue 4, 2023, Pages 61-82]
  • Mokhtari, M. Abolfazl Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration [Volume 25, Issue 1, 2023, Pages 80-96]
  • Mollajafari, Morteza Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2024, Pages 81-99]
  • Momen, Mojtaba Energy Harvesting with a Single Beam with Two Radial Sections under the Tire Rotation Excitation [Volume 25, Issue 4, 2024, Pages 81-99]
  • Monajati zadeh, Hossein - [Volume 13, Issue 3, 2020, Pages 64-78]
  • Moosaei, Amin Estimation of fouling profile in boiler tubes using inverse heat transfer method, laminar flow [Volume 21, Issue 4, 2020, Pages 83-106]
  • Moosavian, Ashkan Bearing Useful Life Prediction based on Vibration Analysis with Empirical Mode Decomposition and Artificial Neural Network Methods [Volume 24, Issue 1, 2022, Pages 208-226]
  • Moradi, Faraz Modeling and simulation of an ammonia-water absorption refrigeration system with investigation of the low pressure effects on system performance [Volume 21, Issue 2, 2019, Pages 178-199]
  • Moradi, Khadijeh - [Volume 13, Issue 3, 2020, Pages 6-27]
  • Moradi, Mehran - [Volume 13, Issue 3, 2020, Pages 64-78]
  • Mortazavi, Mehdi - [Volume 13, Issue 3, 2020, Pages 28-38]
  • Mortazavi Bak, Mahdi Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2024, Pages 51-80]
  • Motahari, Alireza Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Mousaei, Amin Estimation of fouling profile in a heat exchanger pipe applying the conjugate gradient method based on the inverse algorithm [Volume 17, Issue 4, 2016, Pages 23-45]
  • Mousavi, Seyed Bagher Aeroelastic instability of symmetric laminated beam-plates with two delaminations ‎ [Volume 21, Issue 3, 2019, Pages 181-196]
  • Mousavi, Seyed Fazlollah Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Mousavi Naeinyan, Seyed Mojtaba Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Mousavizadeh, Seyed Amir Experimental and Numerical Investigation on the plain and reinforced Steel Sheets under free fall impact [Volume 23, Issue 1, 2021, Pages 64-84]
  • Moussavi, S. Ebrahim Experimental explore of operation effects on mechanical and vibrational properties of DIN X12CrNi2521 in overheating conditions [Volume 23, Issue 2, 2021, Pages 96-113]
  • Mozaffari, Mohammad Hossein Using of Boundary Elements Method in calculating the displacements and stresses of points on the boundaries of a non-homogeneous material with variable modulus of elasticity [(Articles in Press)]

N

  • Naddaf Oskuyi, Alireza Investigation of the effects of rotation speed, feed and depth of tool penetration on composite metal bonding by friction welding [Volume 23, Issue 3, 2022, Pages 93-113]
  • Naderan Tahan, Khosro Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2019, Pages 210-233]
  • Naderi, Ali asghar Experimental study of the behavior of composite plates reinforced with carbon nano tubes under quasi-static shear loading [Volume 23, Issue 3, 2022, Pages 6-28]
  • Naderi, Omid Modeling and Adaptive Control of Temperature and Humidity of a Museum [Volume 22, Issue 3, 2021, Pages 80-98]
  • Naghibi sistani, Mohammad Bagher - [Volume 14, Issue 2, 2012, Pages 76-91]
  • Nahvi, Ali Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Nahvi, Ali Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Nahvi, Hasan Nonlinear vibration analysis of a two-degree of freedom system at simultaneous resonance [Volume 16, Issue 1, 2014, Pages 21-42]
  • Najafi, Bahman Investigation of pilot fuel advancing time influences on dual fuelled engine(Diesel-Natural Gas) pollutant in various loads [Volume 18, Issue 4, 2017, Pages 55-71]
  • Najafi, Bahman Investigation of dual fueled (Diesel-Natural Gas) diesel engine ignition delay in different loads, pilot injection timings and quantities [Volume 20, Issue 2, 2018, Pages 23-39]
  • Najafi, mohammad Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]
  • Najafi, Mohammad Reza Determination of appropriate torsional damper for reduction of vibrations amplitude of ultralight aircrafts engine [Volume 23, Issue 4, 2022, Pages 205-221]
  • Najafi, Mohammad Reza Effect of Pitch Variation on a Propeller Frequencies Analytically, Numerically and Experimentally [Volume 25, Issue 3, 2023, Pages 28-51]
  • Najafi Ardekany, Ali Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2022, Pages 77-92]
  • Najafi Ardekany, Ali Vibration Analysis of Kirchhoff micro plate with C2 Continuity [(Articles in Press)]
  • Najaf Khani, Ali Experimental study of the effect of surface changes to reduce drag in a triangular array heat exchanger [Volume 20, Issue 4, 2019, Pages 137-153]
  • Nakhaei, Mohsen Experimental and FEM analysis of incremental sheet forming, investigation of shape and plate thickness distribution [Volume 16, Issue 3, 2014, Pages 34-46]
  • Namazi, Mohammadmehdi Numerical study and experimental measurement of permeability coefficient in fibrous porous media, considering geometric details for investigating the effect of geometric parameters [Volume 20, Issue 2, 2018, Pages 170-189]
  • Namdari, Allireza Estimation of fouling profile in a heat exchanger pipe applying the conjugate gradient method based on the inverse algorithm [Volume 17, Issue 4, 2016, Pages 23-45]
  • Nami, Nami Energy and exergy assessment and parametric study of combination of MATIANT cycle with an organic Rankine cycle (non-emission) [Volume 20, Issue 2, 2018, Pages 6-22]
  • Naminezhad, Alireza Increasing Relationship between Water, Energy and Environment in a Solar Farm to Produce Fresh Water [Volume 25, Issue 4, 2024, Pages 100-134]
  • Naraghi, Mahyar - [Volume 14, Issue 1, 2012, Pages 74-94]
  • Narimanfar, Hamid Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Narooei, Keivan Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2022, Pages 61-74]
  • Nasrollah Barati, Amir Hossein Nonlinear Forced Vibration of Annular Plate Made of Shape Memory Alloy [Volume 23, Issue 4, 2022, Pages 178-204]
  • Nazari, Nader Low velocity impact analysis of FGCNT annular plate [Volume 22, Issue 3, 2021, Pages 183-205]
  • Negahi, Amir Hossein Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Negahi, Amir Hossein Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • Nehzati, Hassan Design and Verification of a Model-less Approach for Maintaining Battery Safe Operation in Electric Vehicle Using Hardware-in-the-Loop Simulation [Volume 20, Issue 3, 2018, Pages 185-199]
  • Nemati, M. Application of Lattice Boltzmann Method for Simulation of Natural Convection Nanofluid Flow inside a Parallelogram Shaped Cavity with Two Triangular Obstacles in the Presence of Magnetic Field [Volume 21, Issue 2, 2019, Pages 92-113]
  • Nemati, Mohammad The effect of wall shape and aspect ratio on heat transfer non-Newtonian power law fluid in the presence of magnetic field [Volume 22, Issue 4, 2021, Pages 116-130]
  • Nemati, Mohammad Investigation of heat transfer and entropy generated due to hybrid nanofluid mixed convection in lid-driven inclined semi-oval chamber; effect of non-uniform magnetic field [Volume 24, Issue 2, 2022, Pages 46-76]
  • Nematzadeh, Amin Experimental study of hydro-thermodynamic performance of two-pipe heat exchanger using nanofluid and double twisted-tape [Volume 22, Issue 2, 2020, Pages 197-217]
  • Nematzadeh, Nazila 3D Blood Flow Simulation in Artificial Heart with Double Volute using Dynamic Mesh Method [Volume 19, Issue 2, 2016, Pages 6-22]
  • Nikian, Mohammad Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Nikian, Mohammad Analytical solution of flow and heat transfer in a three-tube heat exchanger consisting of evaporator and condenser partially filled with porous media [Volume 24, Issue 2, 2022, Pages 160-190]
  • Niroobakhsh, Mohammad Mahdi Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2019, Pages 118-136]
  • Noori, Amir Numerical investigation of the effect of different forces on the relative velocity of nanofluid by developing a new solver in OpenFOAM [Volume 22, Issue 4, 2021, Pages 72-87]
  • Noori, Mohammad Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Noorolahi Gloje, Yavar Control of chaotic active suspension system in vehicle using Fuzzy-Sliding Delay feedback [Volume 23, Issue 3, 2022, Pages 201-220]
  • Norouzi, Peyman Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Norozi, Mehdi Inplane stress analysis of an isotropic strip containing several moving cracks [Volume 16, Issue 1, 2014, Pages 56-77]
  • Nouri, Saeed Energy analysis of flexible multibody systems with internal damping under impact condition [Volume 19, Issue 1, 2016, Pages 101-117]
  • Nowrozi, Mehdi Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Nozarpoor, Mohsen Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]

O

  • Olfati, Mohammad Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Oloomi, Seid Amir Abbas The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2019, Pages 78-96]
  • Oloomi, Seid Amir Abbas Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Oloomi, Seid Amir Abbas Numerical Investigation of Heat and Fluid Flow in an Open Square Cavity with Nanofluids Newtonian & non Newtonian [Volume 21, Issue 4, 2020, Pages 149-173]
  • Oloomi, Seid Amir Abbas Numerical Simulation of the Flow around a Propeller Using CFD [Volume 24, Issue 3, 2022, Pages 75-93]
  • Omidi, Javad EHD Simulation of Plasma Actuator Effect on Fluid Flow with Boundary Condition Modification in Suzen-Huang Model [Volume 19, Issue 4, 2017, Pages 53-74]
  • Omidpanah, Mohmmad Numerical study of spectral behavior of boundary surfaces on conbmined radiative convective heat transfer [Volume 19, Issue 2, 2016, Pages 60-79]
  • Omidvar, Amir Applying reactive silencer to reduce the flow noise of natural gas pressure regulation station [Volume 15, Issue 4, 2014, Pages 55-68]
  • Ommi, Fathollah Transient and Steady-periodic Performance Analysis of a Multi-stage Thermoacoustic Pulse Tube Cryocooler [Volume 25, Issue 1, 2023, Pages 6-30]
  • ORAK, MOHAMMAD Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]

P

  • Panahandeh, Asad Allah Effect of Pitch Variation on a Propeller Frequencies Analytically, Numerically and Experimentally [Volume 25, Issue 3, 2023, Pages 28-51]
  • Panahi, Mpjtaba Experimental evaluation of needle electrode polarity variations effect on enhancement of water evaporation with electrohydrodynamic method [Volume 16, Issue 2, 2014, Pages 38-59]
  • Parsa, Mehdi - [Volume 14, Issue 2, 2012, Pages 76-91]
  • Parvaneh, Vali Experimental study of quasi-static behavior of sandwich panel with metal/glass fiber trapezoidal core under Transverse loading [Volume 26, Issue 1, 2024]
  • Parvar, Mohsen Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Pasandide Fard, Mahmood Simulation of partial cavitation over the symmetrical circular and elliptical crosss sections using the boundary element method [Volume 17, Issue 2, 2015, Pages 83-106]
  • Pasandide Fard, Mahmood One and two dimensional inviscid and two dimensional viscid flow analysis using the kinetic energy preserving scheme [Volume 14, Issue 4, 2012, Pages 93-117]
  • Pasdar, Emad Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Payeganeh, Gholamhossein Investigation of tensile properties of tensile properties of polypropylene/ graphene/ nano clay nanocomposits applying the response surface methodology [Volume 18, Issue 2, 2016, Pages 22-41]
  • Payganeh, Gholamhasan Dynamic instability of a three-layered soft-cored sandwich beam on elastic foundation [Volume 22, Issue 3, 2021, Pages 30-55]
  • Payganeh, Gholamhosein Experimental study of propylene/waste rubber/Nano clay Nano composites [Volume 15, Issue 1, 2013, Pages 82-99]
  • Pazooki, Farshad Aerodynamic efficiency maximization over sea waves using a combined numerical result with neural network [(Articles in Press)]
  • Pirkandi, Jamasb Thermodynamic and thermoechonomic performance analysis of a small combined heat and power system with solid oxide fuel cell generator [Volume 14, Issue 4, 2012, Pages 29-54]
  • Pirkandi, Jamasb design and simulation of the turbine section in a turbofan engine using numerical methods [(Articles in Press)]
  • Pirmoradian, Mostafa Dynamic Analysis of Micro Functionally Graded Beam under Moving Mass based on Modified Couple Stress Theory [Volume 22, Issue 3, 2021, Pages 142-163]
  • Pour Mohammadi, Abbas Design of a new algorithm for two dimensional movement of swarm robots according to collision avoidance with obstacles based on the Lagrange equations [Volume 17, Issue 3, 2015, Pages 68-85]
  • Pourrajabian, Abolfazl Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2020, Pages 130-148]
  • Poursaeidi, Esmaeil Assessment of the amount of residual stresses in a thermal barrier coating system due to deposition process using analytical, experimental and numerical methods [Volume 22, Issue 1, 2020]
  • Poursaeidi, Esmaeil Transient and steady-state temperature distribution in thermal barrier coating systems under thermal shock and thermal time-harmonic loadings [Volume 24, Issue 4, 2023, Pages 83-108]
  • Pourtaheri, Sadra Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Pourtaheri, Sadra Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]

Q

  • Qasemian Moqadam, Ali Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2019, Pages 118-136]

R

  • Rabiei, Farhad Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Rafiei Pour, Hosein Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods [Volume 17, Issue 1, 2015, Pages 16-39]
  • Rahbar, Nader Evaluation of energy and exergy efficiency of a solar air collector with V grove absorber plate using mathematical modeling [Volume 22, Issue 2, 2020, Pages 148-175]
  • Rahbar, Naser Control of pitch angle of a flexible launch vehicle with model predictive control approach using neural networks [Volume 18, Issue 1, 2016, Pages 22-40]
  • Rahbar, Nasser Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Rahi, Abbas Crack detection of a spur gear by frequency analysis of its vibration response [Volume 19, Issue 3, 2016, Pages 64-88]
  • Rahi, Abbas Natural Frequency Study and parametric Sensitivity Analysis of Axial wind turbine [Volume 20, Issue 1, 2018, Pages 110-131]
  • Rahi, Abbas Experimental and Numerical Investigation of Energy Absorption in Thin-Walled Bi-tubular Conical Tubes under Axial Load [Volume 21, Issue 3, 2019, Pages 138-157]
  • Rahi, Abbas Analytical, numerical, and experimental investigation of wheel and bogie axle vibration to identify bearing defects [(Articles in Press)]
  • Rahimi, Masoud Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Rahmani, Rahmat Ollah Size and shape optimization of two dimensional trusses applying multi objective functions with NSCSS method [Volume 17, Issue 1, 2015, Pages 40-54]
  • Rahmani Hanzaki, Ali Feedback control design of a Kite Generator for specified direction [Volume 18, Issue 1, 2016, Pages 6-21]
  • Rahmani Henzaki, Ali Mathematical modelling and stability study of KiteGen movement in space [Volume 17, Issue 1, 2015, Pages 6-15]
  • Rahmanpour, Morteza Effect of blade section profile on the starting time of a micro-wind turbine [Volume 21, Issue 4, 2020, Pages 130-148]
  • Rajabieh fard, Reza Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Rajaee, Mina Analytical study of the continuous regime effects of hydrogen-air mixture put into a micro-channel with platinum catalytic surface [Volume 20, Issue 4, 2019, Pages 6-25]
  • Ranjbar, Behnam Study and Numerical and laboratory simulation of effective heat transfer parameters using the new structure of a novel insert in heat exchangers [Volume 24, Issue 2, 2022, Pages 21-45]
  • Ranjbar, Faramarz Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Ranjbar, Mohammad Ali Field study of guide vane effect on inlet airflow pattern through radiator of Heller dry cooling tower [Volume 16, Issue 4, 2015, Pages 81-97]
  • Ranjbar, Seyed Faramarz Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2015, Pages 6-24]
  • Ranjbar, S. Faramarz Energy and exergy assessment and parametric study of combination of MATIANT cycle with an organic Rankine cycle (non-emission) [Volume 20, Issue 2, 2018, Pages 6-22]
  • Raouf panah, Alireza Simulation and Analysis of termoeconomic solar compression refrigeration with tracker in the Isfahan with using the Trnsys. [Volume 19, Issue 4, 2017, Pages 36-52]
  • Rasooli, Kasra Implementation of PID controller and construction of hardware in loop for satellite attitude control subsystem [Volume 24, Issue 2, 2022, Pages 6-20]
  • Rastad, Sajad Numerical Investigation of Heat Transfer in Serpentine Microchannel with Al2O3/Water and CuO/Water Nanofluids [Volume 21, Issue 2, 2019, Pages 56-74]
  • Razavi, Seyed Esmaeil - [Volume 14, Issue 2, 2012, Pages 30-44]
  • Razavi, Seyed Esmaeil - [Volume 13, Issue 4, 2011, Pages 19-31]
  • Razavi, Seyed Esmail - [Volume 13, Issue 4, 2011, Pages 7-18]
  • Razavi zadeh, Seyed Erfan Event-triggered robust control of active car suspension systems with parametric uncertainty and physical constraints [Volume 22, Issue 3, 2021, Pages 121-141]
  • Rezaee, Mousa Nonlinear vibration of beam on elastic foundation [Volume 18, Issue 1, 2016, Pages 41-60]
  • Rezaee, Mousa Investigation of nonlinear vibration of spur gears applying the analytical model [Volume 17, Issue 3, 2015, Pages 6-26]
  • Rezaee, Mousa Nonlinear vibration and stability of carbon nanotube conveying fluid embedded in elastic medium [Volume 17, Issue 3, 2015, Pages 27-48]
  • Rezaee, Mousa An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Rezaee, Mousa Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Rezaee, Mousa A new analytical method to investigate the vibrational behavior of fluid embedded pipe [Volume 15, Issue 1, 2013, Pages 6-20]
  • Rezaee, Mousa Instability and Piezoelectric Resonance of a Damped S-FGP Plate Resting on a Foundation with Shear Layer Using Modified FSDT Theory [Volume 20, Issue 1, 2018, Pages 152-186]
  • Rezaee, Mousa Perturbation analysis of resonant and non-resonant excitations of a beam equipped with a nonlinear vibration absorber [Volume 20, Issue 3, 2018, Pages 109-132]
  • Rezaee, Mousa An analytical method for dynamic analysis of fluid conveying viscoelastic pipes b [Volume 21, Issue 1, 2019, Pages 6-29]
  • Rezaee, Mousa Vibration Analysis of Viscoelastic Carbon Nanotube under Electromagnetic Fields based on the Nonlocal Timoshenko Beam Theory [Volume 23, Issue 2, 2021, Pages 176-198]
  • Rezaei, Davood GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]
  • Rezaeian, Omidreza Crack detection of a spur gear by frequency analysis of its vibration response [Volume 19, Issue 3, 2016, Pages 64-88]
  • Rezakazemi, Mashallah Numerical study of the performance of energy recovery ventilation systems with a new membrane shape coupled with heat and mass transfer [Volume 21, Issue 2, 2019, Pages 200-224]
  • Rezazadeh, Sajadollah Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Riahi, Mohammad Investigation the Failures of Journal Bearing by FMEA [Volume 21, Issue 1, 2019, Pages 30-53]
  • Roohi, Masood Optimal Energy Management Design for Hybrid Electric Vehicles [Volume 23, Issue 4, 2022, Pages 57-76]
  • Roshandel, Ramin Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2015, Pages 98-122]
  • Roshanfar, Mohammad Semi-Analytical Eccentric Low-Velocity Impact Analysis of Sandwich Plates Resting on Point Supports, Using a Semi-Analytical Method [Volume 20, Issue 1, 2018, Pages 25-44]
  • Roshani, Majid Investigation of heat transfer and hydrodynamic performance of Al2O3/water nanofluid impinging jet flow in plate pin-fin heat sink [Volume 16, Issue 2, 2014, Pages 60-89]
  • Rostami, Mohsen Energy and Exergy Analysis of Two Configurations Rankin Organic Cycle in Heat Recovery of Internal Combustion Engine Heat [Volume 22, Issue 4, 2021, Pages 88-115]
  • Rostmi, Mohsen Adaptive Data-driven Controller Design for a Control Simulator with a Common Single Main Rotor-single Tail Rotor Configuration [Volume 25, Issue 1, 2023, Pages 80-96]
  • Roudbari Rad, alireza Tasks Assignment of Cooperative Unmanned Aerial Vehicles in Dynamic Environment with Moving Targets Using a Fuzzy Heuristic Linear Programming Approach [Volume 23, Issue 1, 2021, Pages 130-153]

S

  • Saatchi Nowbari, Alireza Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2015, Pages 55-80]
  • Sabahi, Ali Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Saberi, Alireza Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Sabzikar Borojerdi, Mostafa Nonlinear Bending Analysis of Cylindrical Composite Panels Reinforced by Functionaly Graded Carbon Nanotubes [Volume 22, Issue 3, 2021, Pages 164-182]
  • Sadedel, Majid simulation and control of omni-directional mobile robot [Volume 24, Issue 1, 2022, Pages 181-207]
  • Sadedel, Majid Impedance Control of a 6-DoF Robot for Upper-limb Rehabilitation of Children through Combination of Drawing and Physiotherapy Exercises [Volume 25, Issue 4, 2024, Pages 135-154]
  • Sadedel, Majid Condition Monitoring of Reciprocating Compressors using Probabilistic Neural Network and Optimization with Genetic Algorithm [Volume 25, Issue 3, 2023, Pages 84-112]
  • Sadedel, Majid Real-time DCM-based agile locomotion and optimum push recovery of a 3D humanoid robot [Volume 26, Issue 1, 2024]
  • Sadedel, Majid Gait control of humanoid robot with toe joints based on reinforcement [(Articles in Press)]
  • Sadeghi, Hamed Effect of strain hardening modulus on buckling of elastic-plastic cylindrical shells, due to the axial impact [Volume 18, Issue 1, 2016, Pages 91-114]
  • Sadeghian, Farshid Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Sadeghian Bafghi, Sajad Control of pitch angle of a flexible launch vehicle with model predictive control approach using neural networks [Volume 18, Issue 1, 2016, Pages 22-40]
  • Sadri, Mohsen -- [Volume 14, Issue 3, 2012, Pages 29-47]
  • Sadrnia, صدرنیا Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2022, Pages 29-56]
  • Saeb, Siroos Performance enhancement of air coolers using the flow turbulator [Volume 17, Issue 2, 2015, Pages 107-124]
  • Saeedi, Alireza Buckling of thick functionally graded plates based on the higher order shear and normal deformation theories [Volume 17, Issue 3, 2015, Pages 86-105]
  • Saeidi, Hamed - [Volume 14, Issue 1, 2012, Pages 74-94]
  • Safarzadeh, Habibollah Investigation of the effect of porous media under the absorbent plate and thermal recovery on the efficiency of solar air heaters [Volume 22, Issue 2, 2020, Pages 85-102]
  • Safavi, Seyed Mohsen Investigation of two point incremental sheet metal forming evaluation applying the finite element method and experimental study [Volume 15, Issue 3, 2013, Pages 22-36]
  • Saffari, Hamid Theoretical an experimental study of nucleate pool boiling heat transfer on copper hydrophobicity surface [Volume 17, Issue 4, 2016, Pages 85-104]
  • SAFFARIAN, MOHAMMADREZA Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Safizadeh, Mir Saeed Diagnosing Simultaneous Faults of Bearing and Misalignment in Induction Motor using Combined Method of Bispectrum Analysis of Vibration Signal and KNN Algorithm [Volume 25, Issue 3, 2023, Pages 6-27]
  • Saghafi, Babak Investigation of cortical bone post-yield behavior in nano-indentation test using ALE finite element method [Volume 23, Issue 3, 2022, Pages 61-74]
  • Salahshoor, Esmail Energy analysis of flexible multibody systems with internal damping under impact condition [Volume 19, Issue 1, 2016, Pages 101-117]
  • Salari, Mohammad Investigation of the parameters affecting the buckling of the stiffened cylindrical shells under axial load [Volume 23, Issue 2, 2021, Pages 129-156]
  • Salarieh, Hassan analysis and design of a dynamic-based control algorithm for running a five-linked bipedal runner robot [Volume 23, Issue 4, 2022, Pages 93-113]
  • Salehi, Mehdi Experimental evaluation of various Operational Modal Analysis methods in the presence of simultaneous random and harmonic force excitation [Volume 20, Issue 2, 2018, Pages 54-71]
  • Salehi nia, Saeed Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Salehi nia, Saeed Design of intelligent control system for car following according to instant driver behavior [Volume 15, Issue 1, 2013, Pages 100-119]
  • Salimi, Hossein Experimental Study of the Effect of Sun Radiation on Photovoltaic Panel Performance in Winter and Summer seasons in Tehran [Volume 22, Issue 2, 2020, Pages 131-147]
  • Samandari, Hamed Chaotic response of a nonlinear two degrees of freedom quarter car model under road excitation [Volume 15, Issue 3, 2013, Pages 6-21]
  • Sanaye, Sepehr A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Saniee nechad, Mehdi - [Volume 13, Issue 4, 2011, Pages 46-76]
  • Saniei, Pooya Analysis and Field Study of INVELOX Wind Turbine [Volume 19, Issue 2, 2016, Pages 23-40]
  • Sanienejad, Mehdi Comprehensive numerical study of difference between the aerodynamic coefficients in symmetrical classic airfoil with two different assumptions of transitional and fully turbulent flows in both of compressible and incompressible regimes [Volume 17, Issue 2, 2015, Pages 23-67]
  • Saraei Sahnesaraei, Mahdi Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Saremian, Reza An experimental and numerical evaluation of the mechanical properties and behavior of the kelvin lattice structure, made by SLM method [Volume 23, Issue 2, 2021, Pages 157-175]
  • Sarrafi, Ahmadreza A New Energy Management Method Based on Reinforcement Q-learning for Minimizing the Operational Cost of an Energy System [Volume 24, Issue 3, 2022, Pages 49-74]
  • Sayad Keshvari, Hossein Steer-By-Wire Vehicle Control after Tire Burst with Adaptive Sliding Mode Control [Volume 25, Issue 2, 2023, Pages 80-111]
  • Sefidgar, Mostafa Dynamic modeling of hyperthermia treatment with simultaneous solving of convection-diffusion in tumor tissue [Volume 22, Issue 2, 2020, Pages 26-48]
  • Sepahi Samian, Reza Natural convection heat transfer of nanofluid in an enclosure saturated with square and circular blocks [Volume 21, Issue 4, 2020, Pages 174-196]
  • Seyed Aghamiri, Seyede Marziyeh Design of assistive exoskeleton robot for wrist [Volume 21, Issue 1, 2019, Pages 176-187]
  • Seyed Mahmoodi, Seyed Mohammad Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2015, Pages 6-24]
  • Shafiei dizaji, Ayat Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Shahbazi, Hamed Design and Simulation of a Five Degree of Freedom Set included Simulator and Gimbaled Seeker [Volume 25, Issue 4, 2024, Pages 51-80]
  • Shahi, Taher Thermoechonomical investigation of solar energy storage system in greenhouse to reduce the fuel consumption [Volume 15, Issue 2, 2013, Pages 43-61]
  • Shahnaz, Shahab o din - [Volume 14, Issue 2, 2012, Pages 46-59]
  • Shahnazi, Reza Robust Control Design for a Networked Cascade Control System based on Augmented matrix and in presence of Network Delay [Volume 23, Issue 3, 2022, Pages 114-130]
  • Shahramyar, Mojtaba Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Shahrokhzadeh, Alireza Flutter phenomenon of a pressurized functionally graded cylindrical shell in aerodynamic supersonic flow based on the Flugge's theory [Volume 16, Issue 3, 2014, Pages 6-33]
  • Shahsavari, Hamid Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads [Volume 21, Issue 3, 2019, Pages 27-52]
  • Shahsavari, Hamid A semi-analytic modeling of self-healing concrete beam in the framework of continuum damage-healing mechanic [Volume 22, Issue 3, 2021, Pages 6-29]
  • Shakeri, Mahmood Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Shamikhi, Alireza Optimization of 18650 Cells Arrangement in a Commercial Lithium-ion Battery Pack with an Air-cooling Thermal Management System [Volume 25, Issue 1, 2023, Pages 31-59]
  • Shams, Mehrzad Improving heat transfer in the shell & tube heat exchanger with the non-circular cross section tubes [Volume 24, Issue 1, 2022, Pages 33-59]
  • Shani, Mojtaba - [Volume 14, Issue 1, 2012, Pages 53-73]
  • Sharafi, Morteza Guidance law design for the final phase 3D landing mission of booster using high order expansions method [Volume 26, Issue 1, 2024]
  • Sharifi, Saeed Crushing response study of mechanical bitubal parallel energy absorbers [Volume 15, Issue 3, 2013, Pages 37-51]
  • Shariyat, Mohammad Investigation of shape memory and super elasticity behaviors using various micromechanical models due to thermomechanical monotonic and cyclic loads [Volume 16, Issue 3, 2014, Pages 79-104]
  • Shariyat, Mohammad Analytical study of dynamic behavior of functionally graded viscoelastic plates subjected to a transverse load with an arbitrary time variations [Volume 15, Issue 3, 2013, Pages 52-72]
  • SHEIBANI, ALIREZA The effects of nanofluid in mixed heat transfer in localized ventilated with ventilation compartment [Volume 20, Issue 4, 2019, Pages 78-96]
  • Shirzad, Masoud Fabrication and Analysis of a 3D truss Pattern Scaffold made by 3D printing Method [Volume 20, Issue 3, 2018, Pages 30-40]
  • Shojaeefard, Mohammad hasan Design and Optimization of an Internal Combustion Engine Intercooler based on Genetic Algorithm [Volume 20, Issue 4, 2019, Pages 118-136]
  • Shojae fard, Mohammad Hasan - [Volume 14, Issue 2, 2012, Pages 46-59]
  • Shojaeifard, Mohammad Bending analysis of pH-sensitive hydrogels with functionally graded properties [Volume 21, Issue 1, 2019, Pages 116-131]
  • Shokati, Naser Parametric study of heat recovery from test engine cell applying the Rankine cycle with organic fluid [Volume 17, Issue 2, 2015, Pages 6-22]
  • Shokati, Naser Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2015, Pages 6-24]
  • Shokri, Vahid Comparison of one-dimensional two-fluid models to predict two-phase gas-liquid flow variables in a vertical pipe and determination of an appropriate model [Volume 20, Issue 4, 2019, Pages 26-53]
  • Shokri, Yaser Modeling and analysis of total site heat and power cogeneration from an exergoeconomic approach in a 4 MW case study [Volume 22, Issue 4, 2021, Pages 131-153]
  • Shoobi, Peyman Analysis of Non-Newtonian Fluid Flow through a Conical Duct Based on Bingham Model [Volume 19, Issue 4, 2017, Pages 6-17]
  • Sidin, Farid Energy conversion modelling of municipal waste applying hybrid gasifier-molten carbonate fuel cell system [Volume 16, Issue 4, 2015, Pages 98-122]
  • Siyamak, Mohammad-Hassan GPS based positioning of Satellite using cubature Kalman filter [Volume 22, Issue 3, 2021, Pages 56-79]
  • Soleimani, Majid - [Volume 13, Issue 3, 2020, Pages 39-63]
  • Soleimanimehr, Hamid Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2022, Pages 29-60]
  • Soltanipour, Hosseinali Numerical investigation of turbulent nanofluid flow and nanoparticle diameter on heat transfer in a wavy form channel [Volume 24, Issue 1, 2022, Pages 227-251]
  • Sotoodeh bahreini, Rahim - [Volume 13, Issue 3, 2020, Pages 28-38]

T

  • Tabatabaei, Hamidreza Experimental and Numerical Analysis of Turbine Performance Improvement by Changing Turbine Blade Inlet Angle [Volume 22, Issue 2, 2020, Pages 6-25]
  • Taei, Hojat Robust PID Control for Flexible Satellite Considering Dynamics of Thruster Actuator [Volume 24, Issue 3, 2022, Pages 94-119]
  • Tafazoli, Mehdi Manufacturing methods of solid oxide fuel cells (Review article) [Volume 17, Issue 1, 2015, Pages 55-82]
  • Taghi poor, Hossein Experimental study of quasi-static behavior of sandwich panel with metal/glass fiber trapezoidal core under Transverse loading [Volume 26, Issue 1, 2024]
  • Taheri, Mehrdad Real time Detection and Tracking of the Target Object using the Yolov3 Network by the Flying Robot [Volume 24, Issue 4, 2023, Pages 61-82]
  • Taheri, Nima Open-loop control of the car's suspension by considering passenger weight changes, vehicle speed and bump profiles [Volume 23, Issue 3, 2022, Pages 29-60]
  • Tahmasebi, Mojtaba dynamic analysis of the flexible rotor bearing system with floating ring squeeze film dampers and transverse crack in shaft. [Volume 23, Issue 2, 2021, Pages 49-65]
  • Tajalli, Seyed Ahmad The effect of phase transformation on free and forced vibrations of SMA actuators: GDQ modeling of Timoshenko beam [Volume 24, Issue 1, 2022, Pages 86-108]
  • Takalloozadeh, Meisam Optimum layout for Micro-structure of Auxetic Metamaterials Utilizing Moving Morphable Components Approach [Volume 24, Issue 3, 2022, Pages 134-159]
  • Talebi, Roh Allah - [Volume 14, Issue 2, 2012, Pages 46-59]
  • Talebi Tooti, Rooh ollah Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Tamaskani, Reza Controlling the Euler angles of aircraft using incremental nonlinear dynamic inversion [Volume 23, Issue 4, 2022, Pages 29-56]
  • Taraghi Oskooie, Amin An improved EMD method for noisy signal analysis in Time-Frequency domain [Volume 16, Issue 1, 2014, Pages 6-20]
  • Tavakolian, Majid Feasibility Study of Manufacturing Experimental Sample for Composite Insulated Rail Joint [Volume 23, Issue 1, 2021, Pages 154-169]
  • Tavangar, Aref Gait control of humanoid robot with toe joints based on reinforcement [(Articles in Press)]
  • Tavassoli, Naser Energy Absorption Characteristics of Circular Tubes with Circular Circumferential Pattern in Axial Crushing [Volume 20, Issue 1, 2018, Pages 187-208]
  • Teymoori, Samira Identification of the behavior of the drivers that have used amphetamines in car following procedure applying the adaptive neuron fuzzy method [Volume 17, Issue 3, 2015, Pages 49-67]
  • Teymoori Faal, Reza Antiplane stress analysis of transversely isotropic circular plates weakened by multiple defects [Volume 16, Issue 3, 2014, Pages 47-67]
  • Teymoortash, Alireza Experimental study of flow rate, downstream height and jet diameter on stable polygonal hydraulic jumps [Volume 15, Issue 4, 2014, Pages 69-89]
  • Torabizadeh, Mohammad Amin Behavior of Glass Fiber Composite Pipes under Impact Load at Different Temperature Conditions: An Experimental Study [Volume 25, Issue 4, 2024, Pages 6-26]

V

  • Vahidi, Hadi Buckling analysis of circular cylindrical shells made of shape memory alloys in uniform temperature and axisymmetric loading using the exat and numerical solutions [Volume 18, Issue 3, 2016, Pages 61-77]
  • Vahidifar, Saeed Numerical study of the effect of rotating conical obstacle on heat transfer and fluid flow in a heat exchanger tube [Volume 22, Issue 4, 2021, Pages 24-50]
  • Vahidiyan kamyad, Ali - [Volume 14, Issue 2, 2012, Pages 76-91]
  • Valadbeigi, Nima Chaos Analysis and Control in Gear Transmission System using Model Predictive Sliding Mode Algorithm [Volume 25, Issue 2, 2023, Pages 40-56]
  • Vaziri, Seyyed amirreza Thermoelastic analysis of transient FGM thick cylindrical shells using first order shear deformation theory with considering the vertical transverse strains according to Mirsky- Herman assumption [Volume 22, Issue 1, 2020]

Y

  • Yaghoobi, Mahmood Experimental study of dehumidification of humid air over a finned tube by free convection [Volume 15, Issue 2, 2013, Pages 62-77]
  • Yaghootian, Amin Exact Solution of Viscous Fluid Velocity and Pressure Due to Kinematic Effect of Two-Dimensional Boundary Propagating Wave [Volume 20, Issue 4, 2019, Pages 210-233]
  • Yaghotyan, Amin - [Volume 14, Issue 3, 2012, Pages 95-111]
  • Yaghoubi, Mahmood The effect of materials on energy consumption, carbon production and thermal comfort in office building in hot and humid, hot and dry and cold, Iran [Volume 21, Issue 4, 2020, Pages 33-6]
  • Yaghoubi, Mahmood The Effect of office building orientation on solar heat gain, energy consumption and carbon production in hot and humid, hot and dry and cold climate, Iran [Volume 22, Issue 2, 2020, Pages 49-73]
  • Yaghoubi, Mahmood Numerical study on the performance of a solar adsorption chiller with working pair of activated carbon / Methanol [Volume 22, Issue 4, 2021, Pages 6-23]
  • Yaghoubi, Mohammad Reza Thermally Induced Vibration of Beams with Consideration of Rotary Inertia [Volume 19, Issue 3, 2016, Pages 108-126]
  • Yaghoubi, Somaye Optimal design and operation of a CCHP system from an economic perspective For a residential campus located in Ahvaz [Volume 21, Issue 2, 2019, Pages 114-132]
  • Yahyaei, Masood Numerical simulation of direct injection homogenous charge combustion ignition engines with natural gas and diesel fuel [Volume 16, Issue 4, 2015, Pages 55-80]
  • Yarali, Ebrahim Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite [Volume 23, Issue 1, 2021, Pages 6-21]
  • Yari, Morteza Investigation of thermal characteristics effects on exergoeconomic performance of the combined cycle of gas turbine modular Helium reactor with organic Rankine cycle [Volume 16, Issue 4, 2015, Pages 6-24]
  • Yarmohammad, Hossein Remaining Creep Life Assessment of Gas Turbine Blade Made of IN 792 ‎Nickel-Base Superalloy [Volume 18, Issue 3, 2016, Pages 6-18]
  • Yarmohammadi, Sadegh Optimization of trammel pendulum model for simulating fluid sloshing in fuel transport vehicles tank [Volume 16, Issue 2, 2014, Pages 6-21]
  • Yousefzadeh, Shahrooz Hydro-static effect on free vibration of circular plate in contact with bounded fluid on elastic foundation [Volume 21, Issue 1, 2019, Pages 132-150]

Z

  • Zaboli, Sohrab Heat Transfer Optimization for Straight and Helical Double Layer Micro-Channel Heat Sink [Volume 21, Issue 2, 2019, Pages 6-28]
  • Zadshakoyan, Mohammad Design of the L90 automobile gearbox fault detection system using the audio signal analysis [Volume 23, Issue 4, 2022, Pages 114-132]
  • Zakerzadeh, MohamadReza Design and Simulation of a patient-specific ankle orthosis using torsional spring [Volume 23, Issue 1, 2021, Pages 22-42]
  • Zaki Zade, Mehdi Experimental study of the effect of surface changes to reduce drag in a triangular array heat exchanger [Volume 20, Issue 4, 2019, Pages 137-153]
  • Zakizadeh, Reza Numerical Simulation of the Effect of Tube Shape on the Triplex-Tube Heat Exchanger and Exergy Efficiency using Phase Change Material [Volume 24, Issue 1, 2022, Pages 160-180]
  • Zamani, Jamal - [Volume 13, Issue 3, 2020, Pages 39-63]
  • Zamzamian, Kamyar Characteristics based boundary conditions for incompressible flow over a step inside a channel [Volume 15, Issue 4, 2014, Pages 6-22]
  • Zarabadipour, Hasan Predictive Controller Design for Automobile Climate System [Volume 21, Issue 1, 2019, Pages 151-175]
  • Zareinejad, Mohammad Nonlinear Dynamic Modeling and Optimum Electric Power Determination in Energy Harvesting by Bimorph Piezoelectric Cantilever [Volume 23, Issue 3, 2022, Pages 178-200]
  • Zarkesh, Mehran - [Volume 14, Issue 1, 2012, Pages 40-52]
  • Zeinaddini, Afshin Vibration Suppression of a Fluid-Structure via Boundary Control Method [Volume 23, Issue 4, 2022, Pages 77-92]
  • Zia Shamami, Mojtaba Experimental and numerical investigation on performance of sandwich panels using aluminum faces and polyurethane foam core with variable density against explosive loading [Volume 22, Issue 1, 2020]
  • Ziya bashar hagh, Maoud - [Volume 13, Issue 4, 2011, Pages 77-103]
  • Zohdi, Farzin Nonlinear control and Stability of the Tractor Semi-Trailer System based on the Sliding Mode Control In Order to Jackknife Prevention [Volume 22, Issue 1, 2020]
  • Zohoor, Hasan Kinematic and dynamic performance of six-bar mechanism artificial knee [Volume 16, Issue 1, 2014, Pages 43-55]
  • Zohoor, Hassan Solving Inverse Kinematics Problem of Discretely Actuated Hyper-redundant Manipulators using Multi-module Searching Method [(Articles in Press)]
  • Zolfaghari, Alireza Analysis of effective parameters on thermal comfort based on the heat and mass transfer modeling of clothing [Volume 14, Issue 4, 2012, Pages 6-28]
  • Zolfaghari, Seyed Alireza - [Volume 14, Issue 2, 2012, Pages 60-76]